lineSolveINS.h File Reference

Go to the source code of this file.

Functions
Macros to define INS and Temperature line solve No turbulence model *****	if (use4thOrderAD.eq.1) then write(*
Macros to define INS and Temperature line solve No turbulence model do NOT include	grad (p) terms
Macros to define INS and Temperature line solve No turbulence model do NOT include!since then macro is valid for wc	if (nd.eq.2) then!defineDerivativeMacros(DIM
Macros to define INS and Temperature line solve No turbulence model do NOT include!since then macro is valid for wc cc etc	defineDerivativeMacros (2, 2, rectangular) beginLoops() if(mask(i1
Macros to define INS and Temperature line solve No turbulence model do NOT include!since then macro is valid for wc cc etc i3 gt then	if (use2ndOrderAD.eq.1) then defineArtificialDiffusionCoefficients(2
Macros to define INS and Temperature line solve No turbulence model do NOT include!since then macro is valid for wc cc etc i3 gt then end if	if (computeMatrix.eq.1) then am(i1

Variables
Macros to define INS and Temperature line solve	functions
Macros to define INS and Temperature line solve	c
Macros to define INS and Temperature line solve No turbulence model *	insLineSolve
Macros to define INS and Temperature line solve No turbulence model	directions =0
Macros to define INS and Temperature line solve No turbulence model do NOT include!since then macro is valid for	m =uc
Macros to define INS and Temperature line solve No turbulence model do NOT include!since then macro is valid for	vc
Macros to define INS and Temperature line solve No turbulence model do NOT include!since then macro is valid for wc	ORDER
Macros to define INS and Temperature line solve No turbulence model do NOT include!since then macro is valid for wc	GRIDTYPE
Macros to define INS and Temperature line solve No turbulence model do NOT include!since then macro is valid for wc	i2
Macros to define INS and Temperature line solve No turbulence model do NOT include!since then macro is valid for wc	i3
Macros to define INS and Temperature line solve No turbulence model do NOT include!since then macro is valid for wc cc etc i3 gt then	dir
Macros to define INS and Temperature line solve No turbulence model do NOT include!since then macro is valid for wc cc etc i3 gt then	R

Function Documentation

Macros to define INS and Temperature line solve No turbulence model do NOT include ! since then macro is valid for wc cc etc defineDerivativeMacros	(	2	,
		2	,
		rectangular
	)

Macros to define INS and Temperature line solve No turbulence model do NOT include grad

(

p

)

Macros to define INS and Temperature line solve No turbulence model***** if

(

use4thOrderAD.eq.

1

)

Macros to define INS and Temperature line solve No turbulence model do NOT include ! since then macro is valid for wc if

(

nd.eq.

2

)

Macros to define INS and Temperature line solve No turbulence model do NOT include ! since then macro is valid for wc cc etc i3 gt then if

(

use2ndOrderAD.eq.

1

)

Macros to define INS and Temperature line solve No turbulence model do NOT include ! since then macro is valid for wc cc etc i3 gt then end if if

(

computeMatrix.eq.

1

)

Variable Documentation

Macros to define INS and Temperature line solve No turbulence model do NOT include ! since then macro is valid for wc cc etc i3 gt then end if No turbulence model***** c c

Initial value:

====================================================================================


 !  ****** Incompressible NS

Macros to define INS and Temperature line solve No turbulence model do NOT include!since then macro is valid for wc cc etc i3 gt then end if No turbulence model *****c dir

Referenced by DomainSolver::addArtificialDissipation(), CGINS_ApproximateFactorization::INS_Factor::addExplicitContribution(), DeformingBodyMotion::advanceElasticShell(), Cgsm::advanceFOS(), Cgins::advanceLineSolveNew(), Cgins::advanceLineSolveOld(), Cgcns::applyBoundaryConditions(), Cgad::applyBoundaryConditionsForImplicitTimeStepping(), Cgins::applyBoundaryConditionsForImplicitTimeStepping(), Maxwell::assignBoundaryConditions(), Cgsm::assignBoundaryConditionsSOS(), Cgmp::assignInterfaceBoundaryConditions(), Maxwell::assignInterfaceBoundaryConditions(), Cgmp::assignInterfaceRightHandSide(), Cgmp::assignInterfaceRightHandSideOld(), Cgins::assignLineSolverBoundaryConditions(), boundaryDistance(), DomainSolver::buildGrid(), DomainSolver::computeBodyForcing(), Parameters::defineVariableBoundaryValues(), MovingGrids::getBoundaryAcceleration(), ExternalBoundaryData::getBoundaryData(), Cgmp::getInterfaceResiduals(), Cgmp::getInterfaceResidualsOld(), Cgmp::getInterfaceType(), Cgsm::getMaxDivAndCurl(), Cgasf::getTimeSteppingEigenvalue(), MovingGrids::getUserDefinedBoundaryAcceleration(), initialConditionsFromAProfile(), InterfaceTransfer::initialize(), Cgmp::initializeInterfaces(), Cgmp::interfaceProjection(), Cgins::lineSolverBoundaryConditions(), DomainSolver::outputProbes(), DomainSolver::parabolicInflow(), GridFunction::put(), MovingGrids::put(), RigidBodyMotion::put(), Parameters::put(), MovingGrids::rigidBodyMotion(), DomainSolver::setVariableBoundaryValues(), DomainSolver::setVariableMaterialProperties(), CGINS_ApproximateFactorization::INS_Factor::solveLeftHandSide(), CGINS_ApproximateFactorization::INS_Factor::solveRightHandSide(), MovingGrids::update(), RigidBodyMotion::update(), userDefinedErrorEstimator(), and DomainSolver::userDefinedForcing().

Macros to define INS and Temperature line solve No turbulence model do NOT include!since then macro is valid for wc cc etc i3 gt then end if No turbulence model *****c directions =0

Macros to define INS and Temperature line solve functions

Macros to define INS and Temperature line solve No turbulence model do NOT include ! since then macro is valid for wc GRIDTYPE

Macros to define INS and Temperature line solve No turbulence model do NOT include ! since then macro is valid for wc cc etc i3 gt then end if i2

Macros to define INS and Temperature line solve No turbulence model do NOT include ! since then macro is valid for wc cc etc i3 gt then end if i3

Macros to define INS and Temperature line solve No turbulence model * insLineSolve

Macros to define INS and Temperature line solve No turbulence model do NOT include ! since then macro is valid for m =uc

Referenced by Cgad::addForcing(), DomainSolver::advanceAdamsPredictorCorrector(), Cgad::advanceADI(), DeformingBodyMotion::advanceElasticShell(), DomainSolver::advanceImplicitMultiStep(), Cgins::advanceLineSolveNew(), Cgins::advanceLineSolveOld(), DomainSolver::advanceSecondOrderSystem(), Maxwell::advanceSOSUP(), DomainSolver::advanceVariableTimeStepAdamsPredictorCorrector(), Cgcns::applyBoundaryConditions(), Cgins::applyBoundaryConditionsForImplicitTimeStepping(), applyFourthOrderBoundaryConditionsOld(), arrayToState(), RadiationBoundaryCondition::assignBoundaryConditions(), Maxwell::assignBoundaryConditions(), Cgsm::assignBoundaryConditionsFOS(), Cgsm::assignBoundaryConditionsSOS(), Maxwell::assignInitialConditions(), Cgsm::assignSpecialInitialConditions(), Parameters::buildMaterialParametersDialog(), Cgmp::buildRunTimeDialog(), Reactions::checkChemicalSourceJacobian(), Maxwell::computeIntensity(), convergenceRate(), MaterialProperties::cp(), RigidBodyMotion::dirkImplicitSolve(), AdParameters::displayPdeParameters(), dot(), DomainSolver::endTimeStepFE(), DomainSolver::endTimeStepIM(), DomainSolver::endTimeStepPC(), for(), Cgasf::formAllSpeedPressureEquation(), Maxwell::getErrors(), Cgsm::getInitialConditions(), Parameters::getMaterialParametersOption(), DomainSolver::getMaterialProperties(), FlowSolutions::getShockElasticPistonFlow(), Cgad::getTimeSteppingEigenvalue(), Parameters::getUserDefinedKnownSolution(), Cgad::getUt(), Cgcns::getUt(), MaterialProperties::h(), MaterialProperties::hF(), MaterialProperties::hMinusRef(), if(), DomainSolver::initializeTimeSteppingIM(), DomainSolver::initializeTimeSteppingPC(), DeformingBodyMotion::integrate(), MaterialProperties::Kp(), MaterialProperties::lnKp(), MaterialProperties::logKp(), main(), MaterialProperties::MaterialProperties(), mult(), MaterialProperties::mw(), Cgmp::printStatistics(), Maxwell::printStatistics(), DomainSolver::printStatistics(), resFSR(), MaterialProperties::s(), AdParameters::saveParametersToShowFile(), AdParameters::setPdeParameters(), AsfParameters::setPdeParameters(), SmParameters::setPdeParameters(), CnsParameters::setPdeParameters(), InsParameters::setPdeParameters(), InsParameters::setTwilightZoneFunction(), Parameters::setupBodyForcing(), Cgsm::setupGridFunctions(), DomainSolver::setupGridFunctions(), Maxwell::setupUserDefinedForcing(), Cgsm::setupUserDefinedForcing(), DomainSolver::setupUserDefinedForcing(), Maxwell::setupUserDefinedInitialConditions(), DomainSolver::setupUserDefinedMaterialProperties(), DomainSolver::setVariableMaterialProperties(), solve(), stateToArray(), RigidBodyMotion::takeStepImplicitRungeKutta(), RigidBodyMotion::takeStepLeapFrog(), RigidBodyMotion::takeStepTrapezoid(), trans(), Cgins::updatePressureEquation(), DomainSolver::updateVariableTimeInterpolation(), Maxwell::userDefinedForcing(), Cgsm::userDefinedForcing(), DomainSolver::userDefinedForcing(), DomainSolver::userDefinedGrid(), Maxwell::userDefinedInitialConditions(), DomainSolver::userDefinedInitialConditions(), DomainSolver::userDefinedMaterialProperties(), Cgad::writeParameterSummary(), and Cgsm::writeParameterSummary().

Macros to define INS and Temperature line solve No turbulence model do NOT include ! since then macro is valid for wc ORDER

Macros to define INS and Temperature line solve No turbulence model do NOT include ! since then macro is valid for wc cc etc i3 gt then R

Referenced by DomainSolver::adaptGrids(), Cgins::addForcing(), Cgins::addForcingToPressureEquation(), DomainSolver::addGrids(), DomainSolver::advanceVariableTimeStepAdamsPredictorCorrector(), RadiationBoundaryCondition::assignBoundaryConditions(), boundaryDistance(), DomainSolver::buildGrid(), Cgsm::buildVariableDissipation(), Reactions::chemistrySourceAndJacobian(), PistonMotion::computePistonMotion(), MaterialProperties::cp(), F90_ID(), MovingGrids::getBoundaryAcceleration(), RigidBodyMotion::getCoordinates(), TestRigidBody::getErrors(), RigidBodyMotion::getInitialConditions(), RigidBodyMotion::getPointAcceleration(), RigidBodyMotion::getPointTransformationMatrix(), RigidBodyMotion::getPointVelocity(), getRayleighSpeed(), RigidBodyMotion::getRotationMatrix(), Parameters::getTimeDependenceBoundaryConditionParameters(), Parameters::getUserBoundaryConditionParameters(), Cgcns::getUt(), MaterialProperties::h(), initialConditionsFromAProfile(), MaterialProperties::lnKp(), main(), rigidBodyBoundaryProjection(), MovingGrids::rigidBodyMotion(), MaterialProperties::s(), Maxwell::saveSequenceInfo(), Cgsm::saveSequenceInfo(), DomainSolver::saveSequenceInfo(), Parameters::setTimeDependenceBoundaryConditionParameters(), Cgins::setup(), Maxwell::setupGrids(), Cgsm::setupGrids(), Parameters::setUserBoundaryConditionParameters(), Reactions::solveImplicitForPTYGivenR(), Reactions::solveImplicitForRTYGivenP(), Reactions::solveImplicitForYGivenRTP(), PistonMotion::timeStep(), MovingGrids::updateToMatchGrid(), Parameters::updateToMatchGrid(), and DomainSolver::updateVariableTimeInterpolation().

Macros to define INS and Temperature line solve No turbulence model do NOT include ! since then macro is valid for vc